Loose switches
Loose switches
Loose switches

Loose switches

The X-Type Switch Disconnect

The Santon X-type switch is of a modular design and enables a variety of construction combinations. Combinations of DC and AC in one switch are available, for example for simultaneously switching both sides of the inverter if required. 

The switching range is from 10Amp through to 32Amp, with operational voltages from 500Volt through to 1,000Volt.

The Santon X-type switch has many modes of fixing: panel mounting by single hole mounting, base mounting (screw fix) or Din rail mounting.

 

All terminals are easily accessible from the rear or the front of the switch (depending on the model). 

A variety of accessories is available for the Santon X-type switch, consisting of, amongst others, various knobs, padlocking handles and IP65 waterproof seals.

Learn more about the Santon X-Type Switch Disconnect

The P-Type Switch Disconnect

The P-Type Switch, also known as the Santon switch, is a robust switch which is typically useful in dusty environments, in environments where shocks can occur (trains, earth quake or explosions) and designed for switching of DC currents. 

The P-Type Switch is used in many industries and has proven itself to be one of the best switches on the market.

Because of it's modular design the switch can meet practically any customer specific demand.

The P-Type Switch is available in a range of enclosures and can be used in many different environments.

Learn more about the Santon P-Type Switch Disconnect

The FCS-Type Switch Disconnect

The FCS-Type Switch is a modulair built AC/DC switch. Because it's decks are built sideways, the FCS-Type Switch is very suitable for installations in shallow enclosures. The FCS-Type Switch has superior performance AC22 and AC23 ratings and can be used for fused or non-fused switching. 

The robust and installation-friendly design, it's fast switching and the available accesories make the FCS-Type Switch one of the best switches available for bot AC and DC switching.

Learn more about the Santon FCS-Type Switch Disconnect

The C-Type Switch Disconnect

Our cam switches, just as our packet switches, are designed to high quality (Santon) standards.

The switch cells compromise top quality thermohardened melamine with excellent resistance to creepage current and arcing.

 

The double break contacts are coated with a silver alloy and the other components are selected with equal care. 

The sturdy design forms the basis for a range of well dimensioned, almost everlasting switches.

 

The Load Break Isolator Switch

The ‘SLB’ switch disconnectors have been designed according to standard EN-IEC 60947-3 for its use in low volt age civil and industrial installations. Moulded case design with frame parts of non - flammable glass fibre reinforced polyester with high mechanical and electrical

track resistance and with low water absorption. Excellent thermal and dielectric properties of insulating materials adjacent to current carrying parts : Dielectric strength, electrical track resistance and dimensional stability at high temperatures.