Switches in enclosures
Switches in enclosures
Switches in enclosures

Switches in enclosures

Silios

Santon has developed a range of DC safety switches for the protection of Photo voltaic solar systems. This standard range is called the Silios range. 

This switch was developed in close cooperation with major manufactures of solar systems and the relevant German Certification institutes. 

Specifications:

Insulation class : IP65
Degree of protection : two
According to standard : IEC 60947-1/3
Certified by : KEMA and TÜV

Citadel

Santon Switchgear supplies Citadel switches: Plastic enclosures in which a reliable Santon switch is mounted, intended for the most diverse applications and circumstances. The Citadel switch isolators are in accordance with EN 60204, VDE 0113 and NEN 1010-5 article 537 and up to category of use AC 23A/DC 23 in accordance with IE60497- 1 and 3. Every Citadel switch is a targeted combination of materials, enclosure construction and locking. Completely attuned to the requirements you set.

Resistant to chemically aggressive substances, dirt, dust, moisture, cold or heat. For inside or outside use. Stationary or on rolling material. In land installations or onboard of ships, also on deck. In installations with either AC or DC current. 

Specifications:

- Heat resistant up to 300° C / 1 hour
- DC and AC current from 16A up to 1000A, and up to 1000V
- Shock and vibration resistant
- Chemical resistant
- Suitable for switching low current control signals (sustainable low internal resistance - due to the self cleaning contacts)
- Many switch schemes possible due to the modular build up of the switch
- Standard ranges of plastic housings IP55 - IP69 available, on request fitted with signal lamps, key locks, padlocking possibilities, etc.

Optional: Standard ranges of sheet steel, mild steel and cast steel enclosures

Citadel HR

The Citadel HR range consists of specially designed enclosures, which can resist extreme temperatures and chemicals. Fitted with Santon's reliable P-type switch disconnect, with it's self cleaning blade wiping action contacts. This combination creates a product which keeps your installion functioning under the most extreme circumstances, making it suitable for area's like public spaces, tunnels and parking garages.

Specifications:

- TÜV tested heat resistance 400°C for 2 hours
- Chemical resistant material Noryl GFN2-SE1
- Enclosures ranging from IP66 up to IP69
- Shock and vibration proof mounting construction
- AC currents from 16A up to 250A, and up to 1000V
- Self cleaning blade wiping action contacts
- IEC 947-3 certified
- Can be supplied with auxiliaries
- Padlockable

Citadel WR

The Citadel WR range is developed to withstand high pressure cleaning, making it suitable for area's like slaughterhouses, dairy industry, food industry and medicine industry.

Specifications:

- Watertightness IP66, IP67 and IP68- IP69 for high pressure cleaning- EMC versions available

- Chemical resistant material Noryl GFN2-SE1
- AC currents from 16A up to 250A, and up to 1000V
- Self cleaning blade wiping action contacts
- IEC 947-3 certified
- Can be supplied with auxiliaries
- Padlockable

Somerton

The SS Range of enclosed Disconnector switches are housed in Sheet Steel or Stainless Steel enclosures rated at IP65. The Sheet Steel units come in a choice of 2 colours; Grey RAL7035 or Red BS538, the Stainless Steel units are grade 316 polished. 

The Somerton Range of Disconnectors are lid mounted with Red/Yellow padlockable handles, lockable in the Off position by a max of 3 padlocks, locking in the On is also possible -on request.All units come complete with an early break auxiliary as standard and the enclosures have ample room for cabling and are undrilled allowing the installer to make entries where required.

Specifications

- Stainless steel enclosures for AC and DC isolators IP54 – IP65
- Sheet steel cabinets for AC and DC isolators IP54- IP65
- Cast steel solutions for Eexd use, for flammable liquids, gases & vapour-sand, II B T6 (certified for gas groups IIA & IIB, temp. class T6)
- Standard switch ranges: 16A, 25A, 40A, 63A, 100A, 200A, 300A, 500A
- Hand operated, optionally: motor driven or both
- Customer built assemblies

Shelter

SHELTER- CAM SWITCHES IN AN IP65 PLASTIC ENCLOSURE

The Shelter switch from Santon is a competitive solution for switching electrical circuits in accordance with EN-IEC947-3. The Shelter switch for example is used for the isolation of machines, heating equipment, welding equipment, air conditioning units, lamps, lifts and other machinery.

Specifications

- AC current from 10 up to 2000Ampères, and up to 660Volt AC
- Max 12 positions in one deck- Standard enclosures plastic IP65
- Optional with signal lamps, key locks, padlocking possibilities, etc.
- Optional in enclosures IP66, IP67 and IP69
- Many switch schemes possible due to modular set up
- Customer built solutions
- IEC and UL

 

EFI Switches

Local disconnectors, Heavy Duty Type EFI (40A - 1600A /  415V- AC23).Complying with BS EN60947/IEC947 the range of‘EFI’ Local Disconnector switches, comprise of highrupturing, quick make and break contacts. The ‘EFI’ range can be used for motor isolating dutiesfor D.O.L and star-delta motors.

Switch units are available in triple pole, triple pole and switched neutral and six pole. All units are supplied with an early break auxiliary contact wired down to a terminal block as standard.